
18V 12AH Lithium ion Rechargeable Battery pack For power tool Lawn
Mower
Specification:
No. | Item | General Parameter | Remark |
1 | Rated Capacity | 12.0Ah | Standard discharge(0.2 C5)after standard charge(0.2 C5) |
2 | Minimal Rated | 11.7Ah | |
3 | Nominal Voltage | 18.5V | |
4 | Cycle Life | Higher than 60% of the Initial Capacity of the Cells | Charge: CC@0.2C to 18.5V, then CV till current to 0.05C |
5 | Discharge cut-off voltage | 15.0V | |
6 | Charging cut-off voltage | 21V | |
7 | Standard charge | 0.2C constant current(CC) charge to 18.5V,then constant voltage (CV)18.5V charge till charge current decline to ≤0.05C | Charge time : Approx 7h |
8 | Standard discharge | Constant current 0.2C | |
9 | Maximum Charge Current | 1A | |
10 | Continuous Discharge Current | 5A | |
11 | Operation Temperature Range | Charge: 5~45℃ | 60±25%R.H. |
12 | Discharge: -10~60℃ | ||
13 | Storage Temperature Range | Less than 1 year : 0~25℃ | 60±25%R.H. |
Less than 3 months:-5~35℃ | |||
14 | Weight | Approx: 1.5Kg | |
15 | Max.Dimension | Height:190mm | |
Width: 70mm | |||
Length: 90mm |
Handling of battery
Prohibition short circuit
Never short circuit battery. It generates very high current which causes heating of the battery and may cause electrolyte leakage, gassing or explosion that is very dangerous.
The poles may be easily short-circuited by putting them on
conductive surface.Such outer short circuit may lead to heat
generation and damage of the battery.
An appropriate circuitry with PCM shall be employed to protect
accidental short circuit of the battery pack
Mechanical shock
Falling, hitting, bending, etc. may cause degradation of battery
characteristics.
Prevention of short circuit within a battery pack
Enough insulation layers between wiring and the cells shall be used
to maintain extra safety protection.
The battery pack shall be structured with no short circuit
internally, which may cause generation of smoke or firing.
Period of Warranty
The period of warranty is 12 months from the date of shipment. TAC
guarantees to give a replacement in case of battery with defects
proven due to manufacturing process instead of the customer abuse
and misuse.
The batteries should be stored at room temperature, charged to
about 30% to 50% of capacity.
We recommend that batteries be charged about once per half a year
to prevent over-discharge.
Because batteries utilize a chemical reaction, battery performance
will deteriorate over time even if stored for a long period of time
without being used. In addition, if the various usage conditions
such as charge, discharge, ambient temperature, etc. are not
maintained within the specified ranges the life expectancy of the
battery may be shortened or the device in which the battery is used
may be damaged by electrolyte leakage. If the batteries cannot
maintain a charge for long periods of time, even when they are
charged correctly, this may indicate it is time to change the
battery.
BMS data for 18V 12AH Lithium ion Rechargeable Battery pack
| Voltage | Charging voltage | DC:14.60V 3.65/cell |
The balance voltage for single cell | 3.60±0.05V | ||
| Current |
| 78±10mA |
/Consume current | ≤50μA | ||
| 4A | ||
| 4A | ||
| Overcharge protection(single cell) | Overcharge detection voltage | 3.90±0.05V |
| 0.5S-2.0S | ||
| 3.80±0.10V | ||
4 | Over discharge protection(single cell) |
| 2.0±0.10V |
Over discharge detection delay time | 10mS-300mS | ||
| 2.50±0.1V | ||
5 | Over current protection |
| 6±1A |
| 5mS-60mS | ||
/Restorative status | Cut off the load,and failback | ||
6 | Short circuit protection | Detection status |
|
Detection delay time | 200-800us | ||
Restorative status | Cut off the load,and failback | ||
7 | Internal resistance | (MOSFET)/Protection circuit | ≦50mΩ |
8 | Temperature | The range of working temperature | -40-+85℃ |
The rang of the store temperature | -40-+125℃ |
Application:
18.5V 12Ah Power Tool Rechargeable Battery for The lawn mower
Guang Zhou Sunland New Energy Technology Co., Ltd.
Guangzhou Sunland New Energy Technology Co., Ltd. (Sunland Power) is a senior professional service provider of
battery application. Aiming at serving industrial users, it is
dedicated to providing industrial users with optimized battery
supporting solutions and safe, environmental friendly and
cost-effective battery products.
It has a R & D, engineering and management team with more than
10 years of industry experience
From upstream to downstream, the battery industry has the advantage
of vertical integration
Specializing in batteries, battery packs, battery management
systems and energy solutions
The products are widely used in medical devices, coal mine
security, electronic appliances, power supply and standby energy
storage system. For example, the power supply system of electric
bicycle; Solar energy storage power supply system, UPS backup power
supply system. At the same time, it is also an ideal choice for
vehicle starting power supply, military painting and other fields.
We provide professional design and customization services according
to the special needs of customers.