4 Heads 60 Feeders CHMT560P4 Yamaha Feeder Desktop Pick And Place Machine PCB Assembly

CHM-T560P4 Introduction
Desktop SMT pick and place machine Charmhigh CHM-T560P4, 220v/110v
4 heads 60 feeders, for PCB assembly line

CHM-T560P4 main features
1. Model number: CHM-T560P4
2. Brand: Charmhigh
3. Main configuration: Desktop type + 4 Heads 60 feeders + built-in PC + Embedded Linux system + closed-loop control motor with encoder + 2 cameras + linear rail + auto calibrate PCB + touch screen
4. Feeder: 2 options: Yamaha pneumatic feeder & Electric feeder (feeders purchase separately)
5. PCB area: 400*270mm
6. Component: 0402-5050,LED, SOT, SOP, QFN, BGA... etc.
7. Dimension: 1180mm(L)*870mm(W)*600mm(H)mm; AC220V/110V (50/60Hz)
8. Lead time: 2-3 working days
9. Delivery: by DHL or TNT / by air / by sea / pick up from our factory directly / send to China warehouse
10. Payment method: wire transfer (T/T); PayPal; W/U
11. Packing: plywood box

CHM-T560P4 description

This CHMT560P4 is an updated desktop pick and place machine which work with Yamaha feeders.

It has 4 heads with 60pcs feeder slots, front side 30pcs plus back side 30pcs, for small smt production is your good helper!

The operation system is industry level embedded Linux system, the main board of machine was researched by ourselves, which is more reliable than windows system, and life time is much longer.

CHMT560P4 using 502---507 different kinds of Juki nozzles, suitable for 0402,0603,0805-5050, LED, SOT, SOP, QFN, BGA, Diode, Transistor...etc, which can meet more customers' demand. Very good for small batch production or prototyping or education.

It has double vision cameras, which can auto calibrate the PCB before running, auto correction pick position and angle.

CHM-T560P4 Parameters

CHM-T560P4 Advantages:

1. Convenient software, Embedded Linux System of the machine, stable industry main board, independent operation, no need external computer, operation easier and more convenient, learn fast.
2. In-build touch screen, no need external monitor, room saved, more convenient operation, USB mouse supported as well.
3. Top and bottom two vision cameras, correct the position of each components, you can view the vision image from screen for every components.(max component size 22*22mm)
4. It has flexible PCB clamping fixture, suitable for different size of PCB, CHM-T560P4 max support PCB 400mm(L)*270mm(W).
5. It supported custom IC tray, IC tray can be fixed on machine table. Software max allow 20pcs tray.
6. Four mounting heads with 4pcs Juki Nozzles, Juki nozzle inside magnet, so it can be removed by finger, no need to disassemble with wrench, nozzles rotation angle -180 degree to +180 degree.
7. Work with Yamaha standard pneumatic feeders(8mm/12mm/16mm/24mm/vibration feeder) and Electronic feeders(8mm/12mm/16mm).
8. Z axis detection, placement heads can auto back to origin to prevent nozzles break.

9. Max height component support 10mm.
10. Closed-loop control, X,Y Axis with encoder, not out of step.
11. PCB calibrated by two components position, then rest components will be calibrated automatically.
12. Auto calibrate mark 2 points, it will be auto calibration before every running, make sure every PCB mounting precisely.
13. With vacuum detection, with automatic feeding, if one component suck crooked, it will automatically throw it to deposit area, then pick a new one to mount again.
14. With vision detection, camera will auto correction component angle and place on PCB board right place. If heads not picking up components, camera will detect it and go back to pick again, 3 times not picking, machine will alarm and stop, after supply material, then continue working, no need to start over again.

15. Comes with convert tool (PC version), edit work file in computer and load work file into machine by USB port, quick and convenient.
16. Support panelized boards.
17. If you don't have PCB file, you can create a new work file to program in machine directly.

18. Support single step.

19. Support cut tapes/ bulk material/ tube material.

Standard Accessories for CHMT560P4:
1) Pick and Place Machine CHMT560P4: 1
2) Juki nozzle total 4pcs (503, 504, 505, 506 size)
3) 8G USB driver 1
4) Power Cord 1
5) Grease 1
6) Hex wrench 6
7) Tweezers 1
8) Brush 1
9) Additional belt set 1
10) Pen for touch screen 1
11) Fixture for IC tray 4

100% Real photos:

Support IC tray, you can fixed IC tray on the machine table:

USB Mouse and touch screen both supported, no need external monitor or computer, room saved, very easy operation:

X Y axis motor with encoder, closed-loop control, not out of steps:

Why choose Charmhigh?

1.Professional design and room saved.

2.User friendly operation, no need professional SMT engineer, entry-level device

3.One machine - Integrated operation, no need extra pump or PC or any supporting facility.

4.Cost efficient, reduce expense to own a professional full automatic SMT production line.
5. It is very convenient to change machine replacement, easy to fix by self.
6.International express with door to door service, 6-8 working days delivery.

7.Especially for laboratory research and development, to protect your own design and patent.

8.One machine equal to 5 soldering staff, much higher efficient than manual work, easy manage and cost-saved. Good for small batch production.
9.Charmhigh Is factory supply, all of our machine parts are researched and manufacturing by ourselves. After-service spare parts never stop.

10. Charmhigh is a professional manufacturer of SMT Pick and Place machine since, first p&p released in 2011. All the software researched by ourselves, provided good after-sell service.

Enjoy with your pick and place machine!

Service & Warranty:

The complete machine has a warranty period of 1 year from the time of purchase and lifetime service.

We always provide spare parts of machine, factory direct supply with guarantee.

We provide online Q/A and troubleshooting support and technical advice service.

We provide one to one after-sale service. Each machine 100% tested well before ship out.

Tech support:

Kimi's Mob/ WhatsApp: 0086 135 106 75756

Skype: kimiliu89

E-mail: kimi@charmhigh-tech.com

Welcome to follow us in YouTube: www.youtube.com/kimiLiuCharmhigh

If you want to know more information, please contact us by E-mail.

We will response you at the first time.

Our 2 heads and 4 heads desktop SMT pick and place machines are for the majority of small and medium SMT manufacturing research & developments organization, LED Lights, Driver Cards or any Similar Types of Manufacturing Facilities. Our 6 heads, 8 heads and 12 heads vertical standard high speed SMT machine is for big volume production factories. We provide one-stop SMT solution to different customers.

We are very keen to stay up to study with the latest SMT technology, we have confidence to create more quality products. We take after-sales service as the most important thing, please don't hesitate to contact with us if you have any questions or new ideas.