No Center Pin With Cover 5x20mm Ceramic Fuse Holder Block PTF-76 10A 250V UL With Terminal Pitch 15mm

No Center Pin With Cover 5x20mm Ceramic Fuse Holder Block PTF-76 10A 250V UL With Terminal Pitch 15mm

Suitable Fuse

5x20mm Time-Lag / Fast-Acting glass fuse SFC series,STC series,FBC Series,TBC Series

5x20mm Slow blow / Fast Blow Ceramic Tube Fuse BFC Series, BTC Series

Betterfuse glass tube fuse 531 sereis,582 series,573 seris,571 series,523 series

Betterfuse Ceramic Fuse 527 series,522 series,521 series,512 series,511 series

Lansonfuse 5D,5E,5G,5H,5J,5K,5M,5N,5P,5Q,

PTF-76 Specifications

Features

PTF-76 5X20mm PCB Fuse Holder, Horizontal Mount, 15mm Pin to Pin Spacing, No Center Tab, 10 Amp, 250 Volt, UL

PTF-76 5 X 20 mm PCB Mount Fuse Holder, 15 mm Pin to Pin Spacing with no center tab. It is rated at 10 amp at 250 volt.

• clip fuse holder consisting of a soldered-holder with insulated brass springs
• for glass tube micro fuses 5x20mm
• made of polyamide-68, self-extinguishing (UL94V-0)
• cover is included
• metal parts made from brass with nickel layer, tin-plated
• operating voltage, max.: 250V AC
• rated current: 10A
• contact resistance, max.: 5mΩ
• insulation resistance, min.: 102MΩ
• dielectric strength: >3000V AC/60s
• PCB mounting hole: Ø 1.5mm
• colour: green

Curve

Dimensional drawing (mm)

How to Wire a Fuse Holder

Fuses protect electrical devices by providing a breaking point that will interrupt the flow of electricity in a circuit when an excess current develops. This current generates excess heat, and the range of heat tolerance depends on the components and the size of the conductor--wire--used in the circuit. Electronic devices not equipped with fused circuit protection can have an external fuse holder wired into the circuit. The do-it-yourself person can install a fuse holder in 15 minutes with a few tools and a new fuse holder.

Disconnect the electrical power source to the device.
Cut the positive--or "hot"--wire as near to the power source as possible using the wire cutting pliers.
Strip 1/4-inch off each end of the separated wires with the wire stripping pliers.

Strip 1/4-inch off each of the wires on the ends of the fuse holder. Be sure to hold each wire firm when stripping to avoid stress on the fuse holder’s internal connections.
Twist the end of the wire from the power source in either direction creating a helical, or spiral, form. This helps to make the stripped ends firm for connecting.
Insert the twisted wire from the power source into one end of the butt-splice crimp connector and crimp tightly with the crimping pliers.
Insert the twisted wire from the power source into one end of the butt-splice crimp connector and crimp tightly with the crimping pliers.

Uchi was established in 2006 in Dongguan, China. 

After years of development, Uchi has become a large scale hi-tech enterprise that specialized in development and production of complete series of MOV,PTC, NTC series, PPTC series, Fuse(ALL TYPE),Resistor、integrated circuit 、 Capacitor, surge protector and protective devices of lightning protection products. It ranks front in the industry and has heartquarter in Hong Kong. With its excellent technology and quality products, Uchi has won wide recognition of overseas customers. Saini Impex PVT.LTD is our authorized sole distributor in india .

China's leading enterprise of circuit protection components​

Our strength ：

A large number of product series in our factory have passed the certification of various international standards




Factory Tour​ ：

Advanced equipment, lean production

Uchi boasts with a production base that covers an area of nearly 15000 square meters.
 

We successively imported high-tech fully automated production equipments and high precision testing instruments and have put into production to realize the automation, large scale and standardization.

Uchi has a galaxy of hi-tech talent teams headed up by national class experts to engage in the work of product development, product quality control, sales andservice technical support, etc., and has successively obtained tens of certificates of appearance patents, utility patents and inventions.
 

To guarantee the quality, we successfully passed the certification of ISO9001:2008 quality management system, scientific and efficient managing mode to carry out lean production and form scientific and efficient quality control system. The products are certified with UL, CUL, TUV, VDE, CSA and SGS, RACH 73 environmentally friendly testing certifications.

Exquisite quality at customers' favor

Uchi is an export membership of Alibaba with free import and export rights. It is appraised as Guangdong Famous Star Enterprise and Dongguan Private Enterprise. Our products have doubled and redoubled to provide more kinds and high quality and reliable products and service. Our products mainly consist of: 

Metal Oxide Varistor
DIP Varistor & SMD Varistor
Thermally Protected Varistor

DC-Link Capacitor for New energy vehicles supporting the HEVEV

Automotive Fuse Links for EV Plugin HEV FCEV
PTC Thermistor

NTC Thermistor

PPTC Resettable Fuse

Thermal Fuse

Auto Blade Fuse

Glass Fuses

Metal Film Resistor

Carbon Film Resistor

Cement Resistor

NTC Temperature Sensor

CDS Photoconductive Cell

Our products are widely used in New energy vehicles, home appliance, medical equipment, office equipment, communication equipment, phone battery, electronic calendar, electronic thermometer and temperature controller to cover military telecommunications, IT, automobile and consumer electronic fields.
Cooperation with good faiths to win in the market.
Excellent quality sincere service is the key to the success of Uchi. 

In the future Uchi will still stick to the tenets of "Quality first, customer foremost." "First class quality, first class service and customersatisfaction" to manufacture the high quality, technically advanced and reasonable prices products. We hope to trigger with global partners the revolution in resistor products. We cordially welcome friends from home and abroad to visit us for guidance and cooperation.