High Strength T200 carbon fiber Pipes , Winding Single Filament Wound Tubing

High quality T200 carbon fiber tube/Filament Wound Full Carbon tube/carbon fiber tube.

Surface coating: no (according to requirements)
Surface effect: one-way smooth surface
Supply forms: build
Supply capacity: according to the mould number
Reasonable cooperation advantages: department team support!

Step 3, 9 qc inspection.
2. Quality guarantee authentic raw materials
3. Fixed-point logistics guarantee

Product specification

Carbon fiber winding of molding process

The wet winding Wet winding is fiber cluster (yarn belt), glue, directly under tension control winding onto

The mandrel.The advantages of wet winding for:

(1) 40% lower cost than dry winding;

(2) The product has good air tightness, because of the winding tension to squeeze bubbles, the excess

resin adhesive liquid and fill gaps;

(3) Fiber arrangement good parallelism;

(4) The wet winding, fiber resin adhesive solution, can reduce the fiber abrasion

The advantages of the fiber winding

(1) Can be according to the stress of the product design winding, can give full play to the strength of the

fiber

(2) Than high strength: generally speaking, a filament wound pressure vessels with volume,

compared with pressure of steel container, the weight can reduce 40 ~ 60%

(3) High reliability: filament winding is easy to realize mechanization and automation of production,

process condition is determined, put out the product quality is stable and accurate

Carbon fiber product has the following advantages

1. Light weight, high strength Its specific gravity 1.4 1.5 g/cm, is only a quarter of the steel, transportation

and installation is very convenient, compared with the plastic products, its strength is plastic products of

dozens of times, so light weight, high strength is one of the notable characteristics of carbon fiber rod

composites.
2. Corrosion resistance, anti-aging, long service life Carbon fiber bar to acid, alkali, salt, some organic

solvents and other corrosive erosion, in the field of corrosion protection has the incomparable superiority

to other metals, and have good water resistance and aging resistance, so no matter in corrosive

environment and bad in the open air, wet environment operation, its service life can reach more than 15

years.
3. Good safety, high impact resistance, can design sex is strong, is indispensable to modern industrial and

agricultural products one of the new alternative materials

Display

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.
 

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.